They are in terms of number of packets and I think the packet size would be set by the mtu specified in htb. I am not very sure though :) On 6/10/05, Emmet Ford <eford@xxxxxxxxxxxxxx> wrote: > Running "tc -s class show dev eth1" against an HTB qdisc results in the output of class summaries similar to this: > > class htb 1:10 parent 1:1 leaf 10: prio 0 rate 150000bit ceil 1466Kbit burst 2Kb cburst 2Kb > Sent 158641651 bytes 771351 pkt (dropped 0, overlimits 0 requeues 0) > rate 8064bit 7pps backlog 0b 0p requeues 0 > lended: 680985 borrowed: 90366 giants: 0 > tokens: 173443 ctokens: 17746 > > Does anyone know the units of measurement for the reported "lended" and "borrowed" values? > > > -- > Emmet Ford > > Lancer Insurance Company > +1 516.431.4441 Ext. 3233 > eford@xxxxxxxxxxxxxx > > > =========================================================================== > > The information contained in this communication may be confidential, is > intended only for the use of the recipient(s) named above, and may be > legally privileged. You are hereby notified that any dissemination, > distribution or copying of this communication and any of its contents or > attachments is strictly prohibited. If you have received this > communication in error, please notify us immediately by replying to this > message and please delete this message from all computers and servers. > > > _______________________________________________ > LARTC mailing list > LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > > _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
