Re: tc filter - based on iptables - MAC - MARK not working - altough marking on ip src, dst address works

[Andy Furniss <andy.furniss@xxxxxxxxxxxxx>]

Daniel Dafoe wrote:
> --- Andy Furniss <andy.furniss@xxxxxxxxxxxxx> wrote:
>
> Thanks for your input: 
> modified  DEV="eth0"
> indeed was a typo -- but still no luck with shaping
>
>
>
> iptables -L -vnt mangle
>
> Chain PREROUTING (policy ACCEPT 5172K packets, 2786M
> bytes)
>  pkts bytes target     prot opt in     out     source 
>              destination
> 20470 3127K MARK       all  --  *      *      
> 0.0.0.0/0            0.0.0.0/0           MAC
> 00:0D:87:60:61:37 MARK set 0x2
>
> Chain INPUT (policy ACCEPT 1772K packets, 594M bytes)
>  pkts bytes target     prot opt in     out     source 
>              destination
>   849  114K MARK       all  --  *      *      
> 0.0.0.0/0            0.0.0.0/0           MAC
> 00:0D:87:60:61:37 MARK set 0x2
>
> Chain FORWARD (policy ACCEPT 3389K packets, 2191M
> bytes)
>  pkts bytes target     prot opt in     out     source 
>              destination
> 19621 3013K MARK       all  --  *      *      
> 0.0.0.0/0            0.0.0.0/0           MAC
> 00:0D:87:60:61:37 MARK set 0x2

Well that bit looks OK can you see these packets going to the sfqs if 
you do

tc -s qdisc ls dev eth0 ?

I notice from the first post you have a really high ceil and mix kbps 
and kbit. bps = bytes per sec -

> tc class add dev $DEV parent 1: classid 1:1 htb rate
> 600kbps ceil 3276800kbit

Andy.


_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc