Re: How can i send the same traffic to 2 different interface

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 16 Feb 2005 15:05:19 -0300 (EST), favero@xxxxxxxxxxxx
<favero@xxxxxxxxxxxx> wrote:
> Hi! I am making some tests here, and i wanna miror all the
> traffic going to a ip from one interface to another ip.
> example:
> all packets going to 64.223.167.100 should be transmitted by
> ppp0 to internet and by eth2 to the adress 192.168.1.100.
> Someone know how can i do it using iptables or ip route/ip
> rule?

Correct if I'm wrong, I'm still learning. Wouldn't this break IP at
protocol level? The host 192.168.1.100 will disregard the traffic
because it's not the intended destination... I'm not sure but it seems
impossible.

HTH

> Tks in advance!
> Fernando Favero
> _______________________________________________
> LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
> 


-- 

Kenneth Kalmer
kenneth.kalmer@xxxxxxxxx
http://opensourcery.blogspot.com
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux