I have 1 100MB NIC with two 2MB-subnets trough a router behind it. I'd like to create multiple default classes:
1: +
|\_ 1:10 default, ceiling 100000kbit, rate 96000kbit
|
|\_ 1:11 ceiling 2048kbit, rate 2048kbit
| |
| |\_1:110 ceiling 2048kbit, rate 1536kbit | \_1:111 ceiling 2048kbit, rate 512kbit (default subnet1)
|
\_ 1:12 ceiling 2048kbit, rate 2048kbit
|
|\_1:120 ceiling 2048kbit, rate 1536kbit \_1:121 ceiling 2048kbit, rate 512kbit (default subnet2)
I want to use 1:110 for subnet1 sport 3389 I want to use 1:111 for subnet1 (the rest) I want to use 1:120 for subnet2 sport 3389 I want to use 1:121 for subnet2 (the rest)
When selecting
u32 match ip dst 10.106.18.0/24 \ match ip protocol 6 0xff \ match ip sport 3389 0xffff \ flowid 1:120
u32 match ip dst 10.106.18.0/24 \ flowid 1:121
All traffic goes to 1:121. The first filter for port 3389 is ok and works. What am I doing wrong? I'd rather do not use fw selectors. Or should I solve this problem another way?
Richard.
Does it work if you use the prio parameter on the tc filters with 1 for 1:120 rule and 2 for 1.121?
Andy.
_______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
