Hi all, I want to create a bridge (see picture below) between 2 LANs with the same IP range (192.168.0.0/24) using 2 wireless links that use load sharing over multiple interfaces (as descibed here: http://lartc.org/howto/lartc.loadshare.html) for load balancing and fault tolerance. Both links should use IPsec for encryption. I have googled for an example that does this but I could not find it. Is this possible? Not in threory but in practise: has anyone done this? If so, can anyone give me an example/pointer to an example of how to do this? ________ ________ | | | | | ant1.1 |---| ant2.1 | |________| |________| _________ | | _________ | |-eth1-+ +--eth1-| | lan1 --eth0-| bridge1 | | bridge2 |-eth0--lan2 |_________|-eth2-+ +--eth2-|_________| ____|___ ____|___ | | | | | ant1.2 |---| ant2.2 | |________| |________| Groeten, Joost Kraaijeveld Askesis B.V. Molukkenstraat 14 6524NB Nijmegen tel: 024-3888063 / 06-51855277 fax: 024-3608416 e-mail: J.Kraaijeveld@xxxxxxxxxx web: www.askesis.nl _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
