forgot the prefix in the subject... On Thu, 27 Jan 2005 12:00:14 -0600, jacob martinson <martinson.jacob@xxxxxxxxx> wrote: > The interface is setup like this: > # tc qdisc del dev eth0 root > # tc qdisc add dev eth0 root handle 1: htb default 2 > # tc class add dev eth0 parent 1: classid 1:2 htb rate 20mbit ceil 20mbit > > If I add a second class and a filter to send traffic to it like this: > # tc class add dev eth0 parent 1: classid 1:130 htb rate 1Mbit ceil 1Mbit > # tc filter add dev eth0 protocol ip parent 1:0 prio 130 u32 match ip dst \ > > 1.1.1.10 flowid 1:130 > > The output of "tc -d filter show dev eth0" makes sense to me and looks > like this: > filter parent 1: protocol ip pref 130 u32 > filter parent 1: protocol ip pref 130 u32 fh 800: ht divisor 1 > filter parent 1: protocol ip pref 130 u32 fh 800::800 order 2048 key > ht 800 bkt 0 flowid 1:130 > match 0101010a/ffffffff at 16 > > If I add a third class and a filter for it, things start looking weird to me: > > # tc filter add dev eth0 protocol ip parent 1:0 prio 131 u32 match ip > dst 1.1.1.11 \ > > flowid 1:131 > # tc class add dev eth0 parent 1: classid 1:132 htb rate 1Mbit ceil 1Mbit > # tc -d filter show dev eth0 > filter parent 1: protocol ip pref 130 u32 > filter parent 1: protocol ip pref 130 u32 fh 801: ht divisor 1 > filter parent 1: protocol ip pref 130 u32 fh 801::800 order 2048 key > ht 801 bkt 0 flowid 1:131 > match 0101010b/ffffffff at 16 > filter parent 1: protocol ip pref 130 u32 fh 800: ht divisor 1 > filter parent 1: protocol ip pref 130 u32 fh 800::800 order 2048 key > ht 800 bkt 0 flowid 1:130 > match 0101010a/ffffffff at 16 > filter parent 1: protocol ip pref 131 u32 > filter parent 1: protocol ip pref 131 u32 fh 801: ht divisor 1 > filter parent 1: protocol ip pref 131 u32 fh 801::800 order 2048 key > ht 801 bkt 0 flowid 1:131 > match 0101010b/ffffffff at 16 > filter parent 1: protocol ip pref 131 u32 fh 800: ht divisor 1 > filter parent 1: protocol ip pref 131 u32 fh 800::800 order 2048 key > ht 800 bkt 0 flowid 1:130 > match 0101010a/ffffffff at 16 > > If N is the number of filters I have on the root qdisc, I get > N-squared entries from the "show filter" command. > > Can someone explain how this works or point me to documentation that > explains it? My system doesn't have a "tc-filters" manpage. > > Thanks! > > -Jacob > _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
