Hi , this probably was asked many times before , but here it goes.. Until now i was using dsl_qos_queue - http://www.sonicspike.net/software/ Which limits outbound traffic and does packet priorites with iptables using MARKed packets.. works very well , I run a ftpserver + webserver so it's usefull to set these 2 with lowest priority and my multiplayer gaming running on certain UDP ports with the highest priority. The problem now is that dsl_qos_queue adds a QUEUE Target to the POSTROUTING chain for reading the MARKed packets , and i recently added a -j ROUTE target for my load balancing configuration to this chain: /sbin/iptables -A POSTROUTING -o ppp+ -t mangle -m owner --cmd-owner pure-ftpd -m nth --every 9 --packet 0 -j ROUTE --oif ppp1 /sbin/iptables -A POSTROUTING -o ppp+ -t mangle -m owner --cmd-owner pure-ftpd -m nth --every 9 --packet 1 -j ROUTE --oif ppp1 /sbin/iptables -A POSTROUTING -o ppp+ -t mangle -m owner --cmd-owner pure-ftpd -m nth --every 9 --packet 2 -j ROUTE --oif ppp1 /sbin/iptables -A POSTROUTING -o ppp+ -t mangle -m owner --cmd-owner pure-ftpd -m nth --every 9 --packet 3 -j ROUTE --oif ppp1 /sbin/iptables -A POSTROUTING -o ppp+ -t mangle -m owner --cmd-owner pure-ftpd -m nth --every 9 --packet 4 -j ROUTE --oif ppp0 /sbin/iptables -A POSTROUTING -o ppp+ -t mangle -m owner --cmd-owner pure-ftpd -m nth --every 9 --packet 5 -j ROUTE --oif ppp0 /sbin/iptables -A POSTROUTING -o ppp+ -t mangle -m owner --cmd-owner pure-ftpd -m nth --every 9 --packet 6 -j ROUTE --oif ppp0 /sbin/iptables -A POSTROUTING -o ppp+ -t mangle -m owner --cmd-owner pure-ftpd -m nth --every 9 --packet 7 -j ROUTE --oif ppp0 /sbin/iptables -A POSTROUTING -o ppp+ -t mangle -m owner --cmd-owner pure-ftpd -m nth --every 9 --packet 8 -j ROUTE --oif ppp0 since -j ROUTE is a terminating target it never reaches the QUEUE target.. i need an alternative to dsl_qos_queue i just want to effectivly control only once interface ppp0 it's a cable connection using a l2tp tunnel to the ISP , 1500/128kbit . i know nothing about burts , queue buckets whatever , need a working example.. i have all QoS modules compiled and whatever necessary tools _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
