Hi!
roderick tapang wrote:
here's the setup (two dsl - same provider)
+-----> link1 LAN----- linux box --| |----------internet +-----> link2
the setup is ok in terms of the failover requirement. the other link takes over when one is down. however, there is a very noticeable lag when both lines are up. i've tried changing the weight value to a higher one but the links are still under utilized and some client machines playing games or mostly disconnected. taking down one link makes the connection ok. any suggestions? do i need to patch the kernel?
I was in the situation like yours. Following the lartc howto did not result in correct functionality (not the same problems as yours).
I managed to do it using these links: http://www.ssi.bg/~ja/nano.txt http://www.ssi.bg/~ja/#routes
I had to read the nano howto about 5 times to understand it.
-- Udv, Nandor _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
