Re: How to balance OUTBOUND traffic by packet if..

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



junk@xxxxxxxxxxxxx wrote:
I am still looking for a solution to this problem.......

junk@xxxxxxxxxxxxx wrote:

Hi,
Yes i did give this a try a couple of times before with no success

/sbin/iptables -I OUTPUT -m nth --every 2 --packet 1 -t mangle -j MARK
--set-mark 0x2
/sbin/iptables -I OUTPUT -m nth --every 2 --packet 0 -t mangle -j MARK
--set-mark 0x1

Had a go at this on 2.6.9 / iptables 1.2.11 and it seeems nth is broken.

I'll try again tomorrow.

Andy.


_______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux