> a machine (winChip 200mhz cpu, 32mb ram, linux 2.4.28) acting like a > bridge > with > 2 interfaces (eth0 - to our ISP, eth1 - to our network) > machine does not have any IP > > there is a 802.1q vlan eth0.2 > eth0.2 and eth1 are bridged in br0 > > i have one 4mbit link which i share with my friend, i have 3mbit and he > has > 1mbit > > all our IP addresses are public and we have the following setup > > /sbin/tc qdisc add dev eth1 root handle 1: htb default 2 > /sbin/tc class add dev eth1 parent 1: classid 1:1 htb rate 4mbit ceil > 4mbit > /sbin/tc class add dev eth1 parent 1:1 classid 1:2 htb rate 3mbit ceil > 3mbit > /sbin/tc class add dev eth1 parent 1:1 classid 1:3 htb rate 1mbit ceil > 1mbit your filters will not work because of the parent > /sbin/tc filter add dev eth1 protocol ip parent 1:0 pref 1 u32 match ip > src > FRIEDNS_IP flowid 1:3 tc filter add dev eth1 prio 7 parent 1: protocol ip u32 match ip dst FRIENDS_IP flowid 1:3 > /sbin/tc filter add dev eth1 protocol ip parent 1:0 pref 1 u32 match ip > src > MY_IP flowid 1:2 tc filter add dev eth1 prio 7 parent 1: protocol ip u32 match ip dst MY_IP flowid 1:2 _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
