RE: outbound shaping

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
I have a setup with 2 ISPs and 2 LANs, with a /29 subnet on each ISP and a /24 on the LANS.
The gateway box is setup to equally load balance over the ISPs using an IP address from each.
The other 4 IPs are added as virtual devices on the external interfaces.

The problem arises when external A connects to ISP1_IP2_Port_25, works fine first time, but then if I try from A to connect to ISP2_IP6_Port_25 the routing is all wrong and doesn't connect.

Anyone got any suggestions on how to deal with this issue?

I've been tearing my hair out.

Regards,
Daniel.
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/


[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux