Re: [Fwd: Re: ssh and cs LAG]

[Mike Slinn <mslinn@xxxxxxxxxxx>]

We had no problems with smp on 2.6.8.3, and since this cpu supports 
hyperthreading we enjoy a *big* power boost using smp.  :)

Mike


Andy Furniss wrote:

> Hariett Jones wrote:
>
> > Got some solutions myself.
> >
> > LAG is caused by :
> > NETDEV WATCHDOG eth0 timeout
> >
> > this is caused bacause of problems with rtl8139 network card in 
> > kernel 2.6.x
>
>
> I had to unselect SMP in kernel config to get my rtl8139 + PCI modem 
> to work with 2.6.8.1
>
> Andy.
>
> > Solutions :
> > 1.add in lilo.conf : append="noapic"
> > 2.turn apic off in bios
> > 3.if u have 2 rtl8139 cards, then exchange one with some other card 
> > type (chipset)
> >
> > btw. all above was found in various polish forums, but none has 
> > worked for me. im switching kernel back to 2.4.22, and will report 
> > later .
> >
> >
> >
> > _______________________________________________
> > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
> > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>
> _______________________________________________
> LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/


_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/