>"Zviad O. Giorgadze" wrote: >> # Put flow to corresponding classes >> tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.1 flowid 1:21 >> tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.2 flowid 1:22 >> tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.3 flowid 1:23 >> tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.4 flowid 1:24 >> tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.5 flowid 1:25 > >If you are NATting, there is no 192.168.0.anything because the address >has been NATted. But checking via "tc -s -d class show dev eth0" shows that filter correctly recognizes packets and pust it into appropriate class. NAT is performed before the eth0. Zviad _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
