Unknown qdisc "htb", hence option "default" is unparsable

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



(i sent the same message from another email acount, that isn't
memberlist. sorry)

Hi Everyone..!!

i'm beginner in tc with htb, i'm use to limit public, and nat ip clients,
i'm to add to one of my server and get this error:

> tc qdisc add dev eth0 root handle 1: htb default 10
Unknown qdisc "htb", hence option "default" is unparsable

here is my server information:
Linux Server 2.4.20-30.9 #1 Wed Feb 4 20:44:26 EST 2004 i686 i686 i386
GNU/Linux

Module                  Size  Used by    Not tainted
cls_u32                 6300   0  (autoclean)
cls_fw                  3512   0  (autoclean)
sch_sfq                 4096   0  (autoclean)
sch_htb                22176   0
ipt_MARK                1368   2  (autoclean)
ip_nat_ftp              4112   0  (unused)
ip_conntrack_ftp        5296   1
ipt_state               1080   0  (unused)
ipt_limit               1560   0  (unused)
ipt_LOG                 4184   0  (unused)
iptable_nat            21752   2  [ip_nat_ftp]
iptable_mangle          2776   1
iptable_filter          2412   1
ip_conntrack           27304   3  [ip_nat_ftp ip_conntrack_ftp ipt_state
iptable_nat]
ip_tables              15096   9  [ipt_MARK ipt_state ipt_limit ipt_LOG
iptable_nat iptable_mangle iptable_filter]
8139too                18120   1
mii                     3976   0  [8139too]
3c59x                  30736   1
keybdev                 2976   0  (unused)
mousedev                5556   0  (unused)
hid                    22244   0  (unused)
input                   5856   0  [keybdev mousedev hid]
usb-uhci               26412   0  (unused)
usbcore                79040   1  [hid usb-uhci]
ext3                   70784   2
jbd                    51924   2  [ext3]

In my first atemp, the module "sch_htb" wwas not loaded, so i load "modprobe
sch_htb", and again, the same error. Next i downloaded the
"htb3.6-020525.tgz" from http://luxik.cdi.cz/~devik/qos/htb/ and try to
execute with "tc" from tar. It's work, (i think) i check with show and
trafic counter works.

This is "tc" in /sbin/
-rwxr-xr-x    1 root     root       114716 Nov  3  2003 tc
This is "tc" in htb3.6-020525.tgz
-rwxrwxr-x    1 root     root       101992 May 12  2002 tc

The "tc" from the tarball is small compare to the system, so my question is,
can i use the tc from the tarball without any know issue? may i update my
kernel? what version are sure to work?

I'm newbie in this, excuse me my english, i hope understand me. Thanks a
lot.

Marcelo Araujo
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux