we're doing it over the eth0.. i mean anything that comes from eth1 (upload) is shaped on eth0 when it would leave the router/shaper, and downloads (coming in on eth0) are shaped when it gets router to the users on eth1. Both are using HTB and it works just perfectly fine. -diab - diab et> What is best way to be limited upload speed from LAN users. I read et> that it is possible to be done with IMQ interface or with limitation et> over gateway interface of router(eth0 in my "scheme"), but i cannot et> chose what is preferred way and need from advice. et> Please for advise, any example scripts or URL with tutorial are welcome :) et> I read couple times Linux Traffic Control. et> ----------------------------- et> Internet ISP --------| eth0 eth1 |------- LOCAL LAN et> ----------------------------- _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
