Hi all, The following ingress statement: .... $host2 = SLB(cbs 1024kb, cir 2048kbps); class(<>) if ip_dst == 81.175.84.2 && SLB_else_drop($host2); .... is compiled by TCNG into the folling tc command: ... tc filter add dev eth0 parent ffff:0 protocol all prio 1 u32 match u32 0x51af5402 0xffffffff at 16 classid ffff:0 police index 505 rate 256000bps burst 131072 mpu 0 action drop/pass ... (BTW: the ip address may be wrong due not being able to translate dotted decimal to hexedecimal, but the rest is correct) I do not understand the relation between the SLB with "cbs 1024, cir 2048, default mpu" and the tc command with "rate 256000bps burst 131072 mpu 0": I expected that the SLB specs would be translated into something like "rate 2048*8bps burst 1024*8 mpu0". Is this a bug or do I just understand the it? If the latter, can anyone explain the translation to me? TIA Groeten, Joost Kraaijeveld Askesis B.V. Molukkenstraat 14 6524NB Nijmegen tel: 024-3888063 / 06-51855277 fax: 024-3608416 e-mail: J.Kraaijeveld@xxxxxxxxxx web: www.askesis.nl _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
