Hello, i read an old message of Ard van Breemen with subject "More things about /proc / failover of default gateway" (http://mailman.ds9a.nl/pipermail/lartc/2002q1/002667.html) and tryed to do the same config. But then i'm inserting the second default route ip tells: root@epia# ip route add default via 192.168.1.1 RTNETLINK answers: File exists As i know, there are no way to insert more than one route to some net (even 0/0), exept for kernel routes. how it's possible to execute command from the above message? >ip link set dev eth0 up >ip link set dev eth1 up >ip addr add 192.168.1.10/24 dev eth0 >ip addr add 192.168.2.10/24 dev eth1 >ip route add default via 192.168.1.1 >ip route add default via 192.168.2.1 adv routing is on, equalcostmultipath too (but we don't need it) kernel 2.4.23 (gentoo source) thanx for any help PoltoS/ ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ ------------------------------------------------- _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
