Hi folks. Let's say I would like to make some bandwidth control on my network using HTB. I have 2 clients: PC1: 192.168.100.2 PC2: 192.168.100.3 Server: 192.168.100.1 This has 2 NIC's eth1 is local and eth2 is connected to the internet. It could be nice to have a script, where you could specify, how much bandwidth you want for a specific host on a network, like, PC1 has 10/100 MBit network, but only has 256/128, when surfing the net. PC2 has the same network ofc, but 768/384 when surfing/downloading assuming the shared connection is 1024/512. I am currently running wondershaper1.1a which works prefectly, but i wish, it could be more specific. Could also be nice, if it would be someway possible to check on the clients IP or MAC address to verify, if it's "really them". Like it's only PC1 and PC2 who have access to the server in the 192.168.*.* segment. Hope i make myself clear. My server runs redhat 9 in cmd mode/no GUI. Iptables installed script, as firewall. I think a script as i described, could be very complex to write, therefore i ask, whoever is here, for help. Thank you all in advance. Regards Rune Johannesen Denmark _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
