shaping ftp traffic

[nix4me <nix4me@xxxxxxxxxx>]

I added a default class.  It is no longer limiting the entire 
connection, but it is also not limiting ftp traffic for some reason.

Any ideas?

#!/bin/bash
#shaping passive ftp traffic

# mark the outbound passive ftp packets on ports 50000-51000
iptables -t mangle -D POSTROUTING -o eth0 -j MYSHAPER-OUT 2> /dev/null > 
/dev/null
iptables -t mangle -F MYSHAPER-OUT 2> /dev/null > /dev/null
iptables -t mangle -X MYSHAPER-OUT 2> /dev/null > /dev/null

iptables -t mangle -N MYSHAPER-OUT
iptables -t mangle -I POSTROUTING -o eth0 -j MYSHAPER-OUT

iptables -t mangle -A MYSHAPER-OUT -p tcp --dport 50000:51000 -j MARK 
--set-mark 20

# clear it
tc qdisc del dev eth0 root

#add the root qdisk
tc qdisc add dev eth0 root handle 1: htb default 26

#add main rate limit class
tc class add dev eth0 parent 1: classid 1:1 htb rate 100mbps

#add leaf classes
tc class add dev eth0 parent 1:1 classid 1:26 htb rate 100mbps
tc class add dev eth0 parent 1:1 classid 1:20 htb rate 38kbps

#filter traffic into classes
tc filter add dev eth0 parent 1:0  prio 0 protocol ip handle 20 fw 
flowid 1:20
tc filter add dev eth0 parent 1:0  prio 0 protocol ip handle 26 fw 
flowid 1:26
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/