|
Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to 'equalize' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\ nexthop via $P1 dev $IF1 weight 5\ nexthop via $P2 dev $IF2 weight 5 Besides, when I open, for example, the firefox browser, it takes a lot to start navigating, sometimes it works and other times gives an error and I can´t navigate. >From the server it works properly, but form the clients PCs doesn´t. By the way, I´m making NAT toward the Client PCs. Do you have any idea why does it take so long to start navigating and why sometimes it works and sometimes doesn´t. This is the current script running in my server: #================================================= P0_NET=10.0.1.0/24 IF0=eth1 IP0=10.0.1.1 IF1=eth0 IP1=xxx.xxx.xxx.7 P1_NET=xxx.xxx.xxx.0/24 P1=xxx.xxx.xxx.1 IF2=eth2 IP2=yyy.yyy.yyy.21 P2_NET=yyy.yyy.yyy.0/24 P2=yyy.yyy.yyy.1 echo 0 > /proc/sys/net/ipv4/conf/eth0/rp_filter echo 0 > /proc/sys/net/ipv4/conf/eth2/rp_filter echo 3 > /proc/sys/net/ipv4/route/gc_elasticity echo 1 > /proc/sys/net/ipv4/route/gc_interval echo 0 > /proc/sys/net/ipv4/route/gc_timeout ip route flush cache ip route flush all ip route flush table modem0 ip route flush table modem1 ip rule add from $IP1 lookup modem0 ip rule add from $IP2 lookup modem1 ip route add $P1_NET dev $IF1 src $IP1 ip route add $P2_NET dev $IF2 src $IP2 ip route add $P0_NET dev $IF0 src $IP0 ip rule add from $P1_NET lookup modem0 ip route add $P0_NET dev $IF0 table modem0 ip route add 0/0 via $P1 table modem0 ip rule add from $P2_NET lookup modem1 ip route add $P0_NET dev $IF0 table modem1 ip route add 0/0 via $P2 table modem1 ip route add default equalize\ nexthop via $P1 dev $IF1 weight 5\ nexthop via $P2 dev $IF2 weight 5 #================================================= |
