>From the stats is seems that no data are queued - as if nobody is sending them. You are using smp kernel, is your box SMP ? I haven't seen many smp+htb boxes thus there might be possibility of a bug... devik On Thu, 23 Jan 2003 mjoachimiak@xxxxxxxxxxxxxx wrote: > I've attached outputs for eth0 and eth1. > I was trying to get this script running. I've added one class for my NATed > BOX, and it helped. Shaping was stable almost one day but then i added "prio > 0" to eth0 filters and prio 0 for eth1 filters it has braken. So i removed > every "prio 0" and reboot the box but it didnt helped :(. > I've noticed that when the traffic is not much (14 hosts from 50 are up) > tc/htb works very well. > If you want new version of my script say a word. > ----- Original Message ----- > From: "devik" <devik@xxxxxx> > To: <mjoachimiak@xxxxxxxxxxxxxx> > Sent: Thursday, July 22, 2004 3:48 PM > Subject: Re: HTB 3.13 please help > > > > I need > > tc -s -d class show dev xxx > > output during that non-working period. 3.6 is older than 3.13. > > > > ------------------------------- > > Martin Devera aka devik > > Linux kernel QoS/HTB maintainer > > http://luxik.cdi.cz/~devik/ > > > > On Wed, 21 Jul 2004 mjoachimiak@xxxxxxxxxxxxxx wrote: > > > > > Thanks for your reply. I've recent put my problem on lartc list. I'm > using > > > htb 3.13 in 2-4-25smp. > > > I wonder if upgrade to 3.6 will help? Could you be so kind and take a > look > > > at it. I'll be grateful. > > > If you have no time for me i'll understand and try to resolve it for > myself. > > > Thanks. > > > > > > Hello everybody! > > > Since week i dig lists and www and can't find solution for my problem. > > > I'm using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. > > > I've got situation like this: > > > > > > LAN------Linux Box(routing only)------- Linux Box > > > (HTB)--------------Hardware Router(say:HD)------Internet > > > When I start HTB it takes about 5 min. to start working and it works... > > > within this 5min starting i can't ping HD and after about 5min I start > > > pinging. It works like this for cuple of hours, then something strange > is > > > happening. Ping stops, www doesn't work but radio (36kbps) (from > clients) > > > works. There is no ping at all for about 1min and it starts pinging for > > > about 2-3min and it stops for 1-2min and so on..... > > > When I stop HTB ping starts. It's look like HTB is filled to much(sorry > for > > > my english :/) > > > All my children classes rate doesn't exceeds root classes. I have 50 > classes > > > on 900kbit-10kbit(for default class) - downstream and 800-10kbit(for > > > default) up. > > > I shape bandwidth matching ip. r2q is set to 1 . no erros during doing > shape > > > script. > > > I'm attaching this script > > > in ip1 is file where are written ip's for C classes. > > > > > > I'm including my script. > > > ---------------------------------------------------cut > > > > here ----------------------------------------------------------------------- > > > ------------ > > > #!/bin/bash > > > #x=$[100/20] > > > #echo "$1" > /skrytpy/status > > > rxmax=900 #WAN max transfer -down (physically it is 960kbit/960kbit) > > > kbit=kbit > > > rxmaxluser=250 > > > txmax=800 #WAN max transfer - up > > > txmaxluser=100 > > > #counting users > > > # ip1 file is like this: > > > # 11 #Somebody > > > # 23 #Somebody II > > > #EOF > > > licznik=0 > > > for x in $(awk '{ print $1 }' /skrytpy/ip1); do > > > licznik=$[$licznik+1] > > > done > > > > > > > > > #Server > > > licznik=$[$licznik+1] > > > #plus router > > > licznik=$[$licznik+1] > > > > > > echo number of users to $licznik > > > #counting rate > > > rx1=$[$rxmax-10] > > > tx1=$[$txmax-10] # dla klasy domyslnej > > > rxmin=$[$rx1/$licznik] > > > txmin=$[$tx1/$licznik] > > > echo rx $rxmin tx $txmin > > > #echo $rxmin > > > #root classes > > > #rx > > > tc qdisc del root dev eth1 > > > tc qdisc add dev eth1 root handle 1:0 htb r2q 1 default 2 > > > tc class add dev eth1 parent 1:0 classid 1:1 htb rate $rxmax$kbit ceil > > > $rxmax$kbit > > > #tx > > > tc qdisc del root dev eth0 > > > tc qdisc add dev eth0 root handle 2:0 htb r2q 1 default 4 > > > tc class add dev eth0 parent 2:0 classid 2:1 htb rate $txmax$kbit ceil > > > $txmax$kbit > > > #r="$rxmax$kbit" > > > #default classes > > > #rx > > > tc class add dev eth1 parent 1:1 classid 1:2 htb rate 10kbit ceil 10kbit > > > #tx > > > tc class add dev eth0 parent 2:1 classid 2:4 htb rate 10kbit ceil 10kbit > > > > #siec 1.0 > > > siec=1 > > > for ip in $(awk '{ print $1 }' /skrytpy/ip1); do > > > echo -n "$ip " > > > #rx > > > tc class add dev eth1 parent 1:1 classid 1:$ip htb rate $rxmin$kbit ceil > > > $rxmaxluser$kbit > > > tc filter add dev eth1 protocol ip parent 1:0 u32 match ip dst > > > 192.168.$siec.$ip flowid 1:$ip > > > tc qdisc add dev eth1 parent 1:$ip handle $ip:0 sfq perturb 10 > > > #tx > > > #marking packets > > > iptables -t mangle -A MYSHAPER-OUT -p tcp -s 192.168.$siec.$ip -j > > > MARK --set-mark $ip > > > #tc > > > tc class add dev eth0 parent 2:1 classid 2:$ip htb rate $txmin$kbit ceil > > > $txmaxluser$kbit > > > #filtering by mark > > > tc filter add dev eth0 protocol ip preference 1 parent 2:0 handle $ip fw > > > flowid 2:$ip > > > tc qdisc add dev eth0 parent 2:$ip handle $ip:1 sfq perturb 10 > > > done > > > echo "" > > > > > > --------------------------------------------------------------------cut > > > here ------------------------------------------------------------------ > > > > > > > > > > > > _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
