Hello all, Im new using tc, ive been reading the howto at least 2 or 3 times, but there's a lot information to aquire all of it quickly. I've installed a linux box as firewall for a wireless Network in a hotel, this box is a radius for the access points and it uses iptables to redirect and permit/deny the customers to use the net. So it uses iptables to count the bytes to restrict the user using the bytes transferred. Now i have to create a different bandwith restrictions, i've testing using iptables to mark the users and then restrict the bandwith, but it was in a lab scenario, my question is if i create suppose a classifier for 64kbps, 128kbps, 256kbps and so on. do i have to create different classifiers for each customer? or just sending 2 or more customers to the 128kbps lane, both of them will have 128kbps to use and not 128/users? to restrict incoming and outgoing, i need to set a classifier in both interfaces? for incoming traffic the classifier goes to the LAN interface and for outgoing traffic in the WAN? of course switching the source/destination information at the iptables rules used to mark. Thank you. _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
