Anton Glinkov <lartc@xxxxxx> wrote: First, just FYI, there is a sourceforge site just for bonding: http://sourceforge.net/projects/bonding And the associated mailing list: bonding-devel@xxxxxxxxxxxxxxxxxxxxx >I have two linux machines connected via 2 dsl lines (bonded) > >192.168.0.1-eth0-dsl---2Mbit---dsl-eth0-192.168.0.2 > ^-eth1-dsl---2Mbit---dsl-eth1-^ > >so the final figure is something like this: > >192.168.0.1-bond0---4Mbit---bond0-192.168.0.2 [...] >Is this a bug, or I am doing something wrong? It's hard to say without some more information; can you send your /var/log/messages? Ideally, this would include messages from setup and when you test the failure. If it's really big, then feel free to send it off list. Also, what are your network cards and dsl switches? -J --- -Jay Vosburgh, IBM Linux Technology Center, fubar@xxxxxxxxxx _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
