Re: Bandwith especification.

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday 13 May 2004 16:05, Carles Xavier Munyoz Baldó wrote:
> Hi,
> If I have a DSL router with 300kpbs upload bandwith:
> Linux(eth0) ---(100Mbps)---> DSL ---(300kbps)---> INTERNET
>
> Which is the recomended value I must set in my QoS setup for the maximum
> outbound bandwith of my ethernet interface ?
> The max of 300kbps or something less like 290kbps ?
>
> Especify less than the maximum available bandwith is advisable to ensure
> that the QoS algoritms goes fine, isn't it ?
Yes.

Staf

-- 
stef.coene@xxxxxxxxx
 "Using Linux as bandwidth manager"
     http://www.docum.org/
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/


[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux