Hi, I found that I had some thinking error with the wshaper script. I assigned the bandwith of my DSL connection to it, but the machine where it runs is normally connected to the LAN with 100Mbit behind a separate Hardware-Router.Obviously, the complete connection of the machine was slowed down to 384k because I told it so.I guess, since wshaper takes only one card as argument, I can't use that script for shaping, as I just want to slow done specific services on that card, but I can't enter the correct value for Bandwith. So what is the correct way to go? I think I need two paths, one with 100MBit for the local network (where actually there'll happen no shaping) and another path with 384k where I need to shape Internet services after priority... Lars -- visit the C.O.R.E. http://www.the-core.net _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
