I've been trying to get wondershaper 1.1a to let me set NOPRIOPORTSRC, but I cannot get it to work properly.This may be the same problem i discovered a while ago when I used the wondershaper as a base for my own rules. I've fonud trying to make bittorrent behave itself is quite difficult.
The 3 classes have rates specified as UPLINK, 9*$UPLINK/10 and 8*$UPLINK/10
This means the sum of the 3 classes is greater than the parent.
You may want to specify the rates as something lower that add up to UPLINK, and then specify the ceil value for each class.
Am I doing something wrong? On a side note, Is there an easy way to span ports instead of manually typing them all out (like 6881-6900)?I use iptables to change the TOS bit of any packets in that range, then make a u32 filter for those TOS bits.
regards,
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: damion@xxxxxxxxxxxx SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Free Embedded Linux Distro at http://www.snapgear.org ---
_______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
