Re: Dynamic ip adressess..

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday 11 March 2004 15:59, Leonardo Moreno wrote:
> I want to setup a split access and load balanced connection just like the
> common configuration in the how to... my problem is that i have dynamic ip
> adressess on both internet connections... ppp0 (pppoe access) and eth2
> (dhcp) I need to put in the config files the ip adresseses asociated with
> the interfaces but this ip's change all the time... how i can change the
> ip's in my config file automaticaly when the ISP change my IP?
It depends on the dhcp client you use, but most of the time you can run a 
script if the dhcp clients gets a new ip address.  You can probably do the 
same for the ppoe interface.

Stef

-- 
stef.coene@xxxxxxxxx
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/


[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux