Re: ESFQ question

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mihai Tanasescu wrote:
Hello,

I've seen that esfq can do flows based on src/dest addresses.

I have a small lan with private ip's.
I guess that in my case esfq would only work for the download part as
for the upload esfq only sees the src address = the NAT address (as I
can figure from KPTD).


Is there any solution for this ? (regarding esfq ..not by using iptables -j MARK and setting up different classes for everyone....and using sfq)

If you use IMQ it's the same, but there is a NAT patch which lets ingress work properly - maybe it would be possible to make a patch that does the same for egress.


Andy.


_______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux