On Tuesday 24 February 2004 06:12, Nandini wrote: > Hi, > I have a situation where the queue to interface eth0 is full all the > time. > I want my scheduler to send 4 packets to destination 1.2.3.4 followed > by 2 packets to destination 5.6.7.8 ( I assume sufficient packets are > available all the time) > > Is this method of configuring correct > Assuming my *MTU* is 1514 > > tc qdisc add dev eth0 root handle 1: prio > tc filter add dev eth0 parent 1:0 prio 1 protocol ip u32 match ip dst > 1.2.3.4/32 flowid 1:1 > tc filter add dev eth0 parent 1:0 prio 2 protocol ip u32 match ip dst > 5.6.7.8/32 flowid 1:2 > tc qdisc add dev eth0 parent 1:1 handle 10: sfq quantum 6056 > tc qdisc add dev eth0 parent 1:2 handle 20: sfq quantum 3028 > > Will this work ?? Yes, but quantum is for htb classes, not for qdiscs. Stef -- stef.coene@xxxxxxxxx "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
