hi, Im tryig to use two isp links get worked: first isp 212.122.xx.254 (gw) second isp 10.10.xx.2 (gw) my ip1 212.122.xx.90 (eth0) my ip2 10.10.xx.254 (eth1) internal network my ip 192.168.1.254 (eth2) turn on masquerading on both links: $IPTABLES -t nat -A POSTROUTING -o eth0 -j SNAT --to 212.122.xx.90 $IPTABLES -t nat -A POSTROUTING -o eth1 -j SNAT --to 10.10.xx.2 mark packets on 6667 port: $IPTABLES -A PREROUTING -i eth0 -t mangle -p tcp --dport 6667 \ -j MARK --set-mark 1 (^^should it be eth1 or eth2?^^) make routes (iproute): ip route add default via 212.122.xx.254 (default route through first isp) create table antras.out: echo 201 antras.out >> /etc/iproute2/rt_tables assign fwmark: ip rule add fwmark 1 table antras.out add rule: ip rule add default via 10.10.xx.254 dev eth1 table antras.out turn off rpf filter: for i in /proc/sys/net/ipv4/conf/*/rp_filter ; do echo 0 > $i done the problem is that when i try to connect irc it doesn't connect (connection timeout) (i want that irc connect through second isp) what's the problem ? #ip rule ls 0: from all lookup local 32765: from all fwmark 1 lookup antras.out 32766: from all lookup main 32767: from all lookup default #ip route ls 212.122.xx.0/24 dev eth0 proto kernel scope link src 212.122.xx.90 192.168.1.0/24 dev eth2 proto kernel scope link src 192.168.1.254 10.10.xx.0/24 dev eth1 proto kernel scope link src 10.10.xx.254 default via 212.122.xx.254 dev eth0 Thanx for a help Vaidas. _____________________________________________________________ Linux.Net -->Open Source to everyone Powered by Linare Corporation http://www.linare.com/ _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
