|
I want an advise, because I don't know much about lartc, I am using
htb.init. What I want to accomplish: I have a RH9 as gateway in a network with 30 computers. RH9 make SNAT for them to go out on internet, and I want to be able to assign different bandwidth to different computer in local network. ________ ________________ 192.168.0.2 | | | | 192.168.0.3 | switch | ------->eth0 | RedHat 9 | eth1 -> internet ...... | | | | |__ _____| |________________| If I understand corectly I must: 1. include both eth0 and eth1 in traffic control: eth0 will limit download and eth1 will limit upload from lan host perspective 2. because on eth1 I make SNAT I cannot differentiate by source IP different classes, all packets will have the public IP as source after SNAT so I must MARK packets and different classes by this MARK Are any other issue to take in account here? Thank you. -- Razvan Stranschi razvan@xxxxxxx--------------------------------------- This e-mail was scanned for viruses by ARVO. _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ |
