Problems with ipp2p module not marking packets at all

["GoMi" <gomi@xxxxxxxxxxxx>]

Hi there folks :) I installed the ipp2p module v0.5a (i had 0.4 as well)
to classify p2p traffic.

I have it loaded and working:

Module                  Size  Used by    Not tainted
ipt_ipp2p               2656   2

And i have the CONNMARK module to mark traffic:

  iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark
     iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j ACCEPT
     iptables -t mangle -A PREROUTING -p tcp -m ipp2p --ipp2p -j MARK
--set-mark 2
     iptables -t mangle -A PREROUTING -p tcp -m ipp2p --ipp2p-data -j
MARK --set-mark 2

	OTHER MARKING DONE FOR INTERACTIVE TRAFFIC

     iptables -t mangle -A PREROUTING -m mark --mark 0 -j MARK
--set-mark 2
  iptables -t mangle -A PREROUTING -j CONNMARK --save-mark

I have the qdiscs attached with HTB (working fine) and filters to
classify marks (also working)

But the outcome of a iptables -t mangle -L -n -v -x shows this for
ipp2p:

    pkts      bytes target     prot opt in     out     source
destination
   14097  4339998 CONNMARK   all  --  *      *       0.0.0.0/0
0.0.0.0/0          CONNMARK restore
   10067  4144428 ACCEPT     all  --  *      *       0.0.0.0/0
0.0.0.0/0          MARK match !0x0
       6      504 MARK       icmp --  *      *       0.0.0.0/0
0.0.0.0/0          MARK set 0x4
       0        0 MARK       tcp  --  *      *       0.0.0.0/0
0.0.0.0/0          ipp2p v0.5a --ipp2p MARK set 0x2
       0        0 MARK       tcp  --  *      *       0.0.0.0/0
0.0.0.0/0          ipp2p v0.5a --ipp2p-data MARK set 0x2
      14      912 MARK       udp  --  *      *       0.0.0.0/0
0.0.0.0/0          udp dpt:53 MARK set 0x1
     434    20812 MARK       tcp  --  *      *       0.0.0.0/0
0.0.0.0/0          tcp dpt:80 MARK set 0x1
       0        0 MARK       tcp  --  *      *       0.0.0.0/0
0.0.0.0/0          tcp dpt:25 MARK set 0x2
    3522   169036 MARK       tcp  --  *      *       0.0.0.0/0
0.0.0.0/0          tcp dpts:0:1024 MARK set 0x1
      10     2198 MARK       udp  --  *      *       0.0.0.0/0
0.0.0.0/0          udp dpt:!53 MARK set 0x2
       5      240 MARK       tcp  --  *      *       0.0.0.0/0
0.0.0.0/0          tcp dpt:1863 MARK set 0x1
       0        0 MARK       tcp  --  *      *       0.0.0.0/0
0.0.0.0/0          tcp dpt:1214 MARK set 0x2
       2       80 MARK       tcp  --  *      *       0.0.0.0/0
0.0.0.0/0          tcp spt:80 MARK set 0x5
     471    22600 MARK       all  --  *      *       0.0.0.0/0
0.0.0.0/0          MARK match 0x0 MARK set 0x2
    4030   195570 CONNMARK   all  --  *      *       0.0.0.0/0
0.0.0.0/0          CONNMARK save

Any one with an idea why the hell is not recognizing traffic at all??
Thank you!!


_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/