Hi, the documentation says "[the major number of a class] must be unique within a egress or ingress setup. The minor number must be unique within a qdisc and his classes." What is meant by "setup"? Does that include all qdiscs attached to any network device? Ie, if I have a qdisc attached to eth0 and another attached to eth1, do the major numbers I use have to be different at all or could I use the same number structure in eth0 and eth1? Short example to explain: tc qdisc add dev eth0 root handle 1: htb default 13 tc class add dev eth0 parent 1: classid 1:1 htb rate 100kbps... tc class add dev eth0 parent 1:1 classid 1:10 htb rate... ... tc qdisc add dev eth1 root handle 1: htb default 13 tc class add dev eth1 parent 1: classid 1:1 htb rate 100kbps... tc class add dev eth1 parent 1:1 classid 1:10 htb rate... ... Is this valid? Or do I have to use "2:" instead of "1:" in the second part? thanx cb _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
