Hi,
I'm trying to police the incoming traffic by using ingress qdisc,this is what I have in my script
tc qdisc add dev eth0 handle ffff: ingress
tc filter add dev eth0 parent ffff: protocol ip prio 4 \
handle 1: u32 divisor 1
tc filter add dev eth0 parent ffff: protocol ip prio 4 u32 \
match ip dport 4001 0xffff \
police rate 2000kbit burst 50k drop \
flowid 1:1
I'm sending a 9Mb traffic using iperf but noticed that the bandwith at the receiving end is 4 MB instead of 2M. When Im changing the police rate to 3MB, the traffic at the receiving end is 6MB. Any ideas why does this happen? Your help is greatly appreciated.
Vince
UTS CRICOS Provider Code: 00099F
DISCLAIMER
========================================================================
This email message and any accompanying attachments may contain
confidential information. If you are not the intended recipient, do not
read, use, disseminate, distribute or copy this message or attachments.
If you have received this message in error, please notify the sender
immediately and delete this message. Any views expressed in this message
are those of the individual sender, except where the sender expressly,
and with authority, states them to be the views the University of
Technology Sydney. Before opening any attachments, please check them for
viruses and defects.
========================================================================
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
