why all goes to default!!

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I have config like this ,... but all traffic goes to the default class 1:4, WHY ?
What I' doing wrong... filters are attached to the root !

tc qdisc add dev eth0 handle 1:0 root htb default 4 

  tc class add dev eth0 parent 1:0 classid 1:4 htb rate 55kbit ceil 55kbit prio 7   <--default class
 
  tc class add dev eth0 parent 1:0 classid 1:1 htb rate 20Mbit
 	tc qdisc add dev eth0 handle 2:0 parent 1:1 htb

	    tc class add dev eth0 parent 2:0 classid 2:3 htb rate 30kbit ceil 30kbit
	      tc qdisc add dev eth0 handle 3:0 parent 2:3 sfq
	      tc filter add dev eth0 parent 1:0 protocol ip prio 2 u32 match ip dst x.x.x.X classid 2:3

	    tc class add dev eth0 parent 2:0 classid 2:5 htb rate 30kbit ceil 30kbit
	      tc qdisc add dev eth0 handle 4:0 parent 2:5 sfq
	      tc filter add dev eth0 parent 1:0 protocol ip prio 2 u32 match ip dst x.x.x.X classid 2:5
	      tc filter add dev eth0 parent 1:0 protocol ip prio 2 u32 match ip dst x.x.x.X classid 2:5

...... and many like this
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux