Re: Parent rate=ceil Limit not respected

["Chijioke Kalu" <kchijioke@xxxxxxx>]

Thanks Stef,

but then, what bandwidth should I place on the first class, 10mbit or 
90Kbit?

am re-writing the script to follow what you've just suggested, it will look 
like this...

                                                                 root (1:0)
                                                                         |
                                                                class (1:2) 
(10mbit or 90Kbit or nothing ?)
                                                              /             
        \
                                             class (1:3)                   
class (1:4)
                      (LAN Traffic) (10Mbit)                      (90Kbit) 
(Internet Traffic)
                                                                            
              |
                                                                            
              |
                                                                          
------------------------- -----------------------
                                                                         |  
                               |                              |
                                                                    1:10    
                      1:11 - 1:31               1:50
                                                       (high prio icmp,ack) 
       (sys01 ... sys20)        (default)


1. Is this what you're asking?

2. Is there any other improvements I can make on the script to make it 
efficient?

Thanks

K

_________________________________________________________________
Frustrated with dial-up? Get high-speed for as low as $26.95.  
https://broadband.msn.com (Prices may vary by service area.)

_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/