I have a class parent and a class child; In the child class I have 6 dropped pachets, but in the parent class I have none(in teh example configuration parent is 1:9 and child is 1:2eb). Is this possible, or I have somethimg wrong in the configuration? My exact problem is: -I have many clases that have 1Kbit rate and 500Kbit ceil. -I have HZ=1000, compiled in the kernel. When I create a class with rate=64Kbit, ceil=64Kbit, this class will not transfer at this exact rate. The rate will repat jumping from a few Kbits to 64Kbits and back, but will never stay at the rate=64Kbit. More than that, many clases that have rate=1Kbit, ceil=500Kbit will have a better transfer than the class with rate 64Kbit. My configuration is: tc qdisc add dev eth1 root handle 1: htb default 2 tc class add dev eth1 parent 1: classid 1:9 htb rate 1400Kbit prio 0 quantum 2000 tc class add dev eth1 parent 1: classid 1:2 htb rate 9999Kbit prio 0 quantum 2000 Just one class and 1 filter(thay are many): tc class add dev eth1 parent 1:9 classid 1:2eb htb rate 64Kbit ceil 500Kbit prio 0 quantum 2000 tc filter add dev eth1 parent 1: prio 1 handle 7: protocol ip u32 divisor 256 tc filter add dev eth1 parent 1: prio 1 protocol ip u32 ht 800:: match ip dst xxx.xxx.xxx.0/24 hashkey mask 0x000000ff at 16 link 7: tc filter add dev eth1 prio 1 protocol ip u32 ht 2:eb match ip src xxx.xxx.xxx.xxx flowid 1:2eb Configuration for upload is simetrical. Thank you _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
