Hey everyone, I tried to mark traffic based on per subnet as to the usual per ip. Example: Tc class add dev eth0 parent 1:11 htb rate 400kbit ceil 500kbit prio4 Tc filter add dev eth0 parent 1:0 protocol ip prio 7 u32 dst 192.168.0.0/24 classid 1:11 After I enter this command, I did not get any errors. Does this mean that EACH IP belonging to that subnet will have a maximum rate of 400kbit? Or does it mean that ALL the IPs in that subnet have a total of 400kbit? Thanks in advance. Regards edmund _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
