On Monday 27 October 2003 23:37, Mihai Tanasescu wrote:
> I currently have a 128kbps cable link to the internet..and I'm sharing
> this connection with others.
> I've made the following script(for alocating bandwidth depending on the
> services used: browsing, squid, games like counter-strike, icmp, ssh),
> which unfortunately isn't working very well as the response times I'm
> getting upon pinging the server are almost the same I get without the
> htb script being loaded.
> Any ideas ?
>
> 2.
>
> I have the same problem with a htb script on an adsl connection (with
> the htb script I get ping response times of 80-90..without it I get
> 200-300 ms...but these response times aren't very stable..it's
> something
> like I'm getting 40 ms..then 100 ms..then 50 ms..)
>
> Sorry about the size of this message.
No problem.
I don't see a problem with your script, but can you also post the output of tc
-s -d class show dev eth0. And for eth1?
Stef
--
stef.coene@xxxxxxxxx
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
