Hello all,
I was just wondering If i could do this..
Local___ public_________Gateway1
Subnet IP
local net |------192.168.1.1--| Internet
192.168.1.0-----| |-------202.202.1.1
|------202.202.1.6--|
here goes my routing table
at any subnet say 192.168.1.2 i want some thing like this
1] route to 202.202.1.0/24 via 192.168.1.1
2] default gateway via 202.202.1.1
but at second routing configuration I get host unreachable error by both
route and ip route command..
Though there is route to 202 network via 192.168.1.1 it says unreachable
but I can ping to 202 network..
what should I do to achieve this?
Why I need to do is for dead gateway detection, I do not want to check
the nexthop reachable or not, i need to know if ISP is reachable..
Any support will be grateful!!
regards
Vadiraj C S
_______________________________________________
LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
