Oh ok, it's working now. The script is fine. My test tool isn't accurate. Now i have test with iperf and get accurate result. Other question ...:) which ingress qdisc that accurate like htb? Thnx ----- Original Message ----- From: "Rio Martin" <rio@xxxxxxxxx> To: <lartc@xxxxxxxxxxxxxxx> Sent: Monday, October 13, 2003 1:07 PM Subject: Re: >10Mbit on HTB > On Monday 13 October 2003 12:16, Catalin BOIE wrote: > > On Sat, 11 Oct 2003, Kristiadi Himawan wrote: > > > I want to try to shape 20-30Mbps traffic using HTB. > > > It's possible? Anyone already try this? > > Yes. It's working very good. > > You may want to use hashes if you have a lot of filters. > > > Thanks. > > Mine also, > Here goes the result: > > ### eth1: traffic classes > class htb 1:10 root leaf 10: prio 0 rate 20Mbit ceil 20Mbit burst 27810b > cburst 27810b > Sent 290896540 bytes 192377 pkts (dropped 0, overlimits 0) > rate 2545587bps 1683pps backlog 4p > lended: 192373 borrowed: 0 giants: 0 > tokens: -8887 ctokens: -8887 > > Regards, > Rio Martin. > -- > NOC ITENAS-net > www.itenas.ac.id > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
