On Saturday, 11 October 2003, at 21:28:10 +0700, Kristiadi Himawan wrote: > Below is the script: > [snipped] > The script seems correct, and very similar to what I use, except I don't even need to set up a "filter" to direct traffic, because in my tests I just need to limit the output to some speed. > When i try to shape 20Mbit, there's dropped packet but i see the bandwidth not shaped to 20Mbit. > But when shape to 10Mbit, i see the bandwidth down to 13Mbit. > Some time ago there was a report from someone who tried HTB in 2.5.x kernels and saw a strange behaviour. For details, check: http://bugme.osdl.org/show_bug.cgi?id=657 In short, it seems bandwidth limiting behaves strange for different outgoing packet sizes. Regards. -- Jose Luis Domingo Lopez Linux Registered User #189436 Debian Linux Sid (Linux 2.6.0-test6-mm4-lirc) _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
