--- Stef Coene <stef.coene@xxxxxxxxx> wrote: > On Thursday 09 October 2003 23:58, Praveen Mehrotra > wrote: > > Hello, > > > > I'm having problem adding filters using tc. I get > the > > response back RTNETLINK answers-invalis argument. > > > > Though the tc qdisc and tc class commands work > fine. > > In my kernel config, QoS related parameters are > > enabled (CONFIG_NET_SCHED, CONFIG_NET_QOS, > > CONFIG_NET_CLS, CONFIG_NET_CLS_U32, > > CONFIG_NET_SCH_HTB). Also CONFIG_NETLINK, > > CONFIG_RTNETLINK and CONFIG_NETLINK_DEV are set to > 'y' > Can you post your tc commands? > > Stef Hi Stef, I'm using following commands (i'm trying to use it with IMQ). I'm trying the example given in IMQ section of adv-routing-howto doc. # tc qdisc add dev imq0 root handle 1: htb default 11 # tc class add dev imq0 parent 1: classid 1:1 htb \ rate 4mbit burst 10k # tc class add dev imq0 parent 1:1 classid 1:10 \ htb rate 2mbit # tc class add dev imq0 parent 1:1 classid 1:11 \ htb rate 2mbit # tc qdisc add dev imq0 parent 1:10 handle 10 pfifo #tc qdisc add dev imq0 parent 1:11 handle 11: pfifo # tc filter add dev imq0 parent 10:0 protocol ip \ prio 1 u32 match u32 00100000 00ff0000 at 0 \ flowid 1:10 All commands except the last one work fine. Thanks for your help, Praveen __________________________________ Do you Yahoo!? The New Yahoo! Shopping - with improved product search http://shopping.yahoo.com _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
