Hello Anton, Wednesday, October 8, 2003, 4:49:30 PM, you wrote: I am using HTB3 with more than 10 megabits customers, and amount of classes about 100-200 without any problem. Only one what i do - i make filter with lowest priority, to not pass ass unclassified traffic to default class, just to drop it. I think you just need review your classes, because also if you have any rate more 468 Kbit, you need change r2q or quantum. AY> Hello, AY> I`ve been using htb v2 for more then a year without any major problems. AY> Recently I needed to upgrade to newer kernel becouse of non LARTC AY> related issues. After installing 2.4.22 when the htb qdisc was attached AY> to the interface even without any rules, I was not able to send more AY> ~1mbit through the interface. After I reversed the htb3 patch and AY> rebuild with htb2 everything works as normal. Has anyone experienced the AY> same issue? thanks -- Best regards, Denis mailto:admin@xxxxxxxxxxx _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
