On Monday 22 September 2003 13:37, kristiadi himawan wrote: > Dear All, > > Sorry if my question here ever asked before by someone else. > > I have configuration like this : > |---------trunking------| > > V eth0 eth1 V > router<--->bridge with htb<--->switch > 202.xx.xx.227 > > #!/bin/bash > tc qdisc del dev eth0 root handle 1: > tc qdisc add dev eth0 root handle 1: htb default 10 > tc class add dev eth0 parent 1: classid 1:1 htb rate 32kbit ceil 32kbit > tc class add dev eth0 parent 1:1 classid 1:10 htb rate 24kbit ceil 24kbit > tc class add dev eth0 parent 1:1 classid 1:20 htb rate 8kbit ceil 8kbit > tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip dst > 202.xx.xx.227 flowid 1:20 > > I already patch kernel and tc with htb3.6-020525.tgz from htb website. > > Here is the result when there's traffic to 202.xx.xx.227, it should go to > 1:20, but fill class 1:10 (red sign). > > ### eth0: queueing disciplines > qdisc htb 1: r2q 10 default 10 direct_packets_stat 0 > Sent 584256 bytes 881 pkts (dropped 0, overlimits 1113) > backlog 35p > > ### eth0: traffic classes > class htb 1:1 root rate 32Kbit ceil 32Kbit burst 1639b cburst 14704b > Sent 554186 bytes 846 pkts (dropped 0, overlimits 0) > rate 3040bps 3pps > lended: 0 borrowed: 0 giants: 0 > tokens: -7997 ctokens: 8145 > class htb 1:10 parent 1:1 prio 0 rate 24Kbit ceil 24Kbit burst 1629b cburst > 1629b Sent 584256 bytes 881 pkts (dropped 0, overlimits 0) > rate 3040bps 3pps backlog 35p > lended: 846 borrowed: 0 giants: 0 > tokens: -447876 ctokens: -447876 > class htb 1:20 parent 1:1 prio 0 rate 8Kbit ceil 8Kbit burst 1609b cburst > 1609b Sent 0 bytes 0 pkts (dropped 0, overlimits 0) > lended: 0 borrowed: 0 giants: 0 > tokens: 1287999 ctokens: 1287999 > > ### eth0: filtering rules > filter parent 1: protocol ip pref 1 u32 > filter parent 1: protocol ip pref 1 u32 fh 800: ht divisor 1 > filter parent 1: protocol ip pref 1 u32 fh 800::800 order 2048 key ht 800 > bkt 0 flowid 1:20 match ca2ba0e3/ffffffff at 16 > > > Why when i put htb on eth0 to filter class 1:20 the shaping always goes to > default class 1:10 not 1:20 class, the same problem occur when i put htb on > eth1? I already patch the kernel with 3c95x vlan patch too. > Any idea why the filter not working properly or i need another patch to get > u32 working in bridging+trunking or i must replace u32 filter with fwmark > from ebtables? See this faq entry (last line), maybe that's the solution : http://www.docum.org/stef.coene/qos/faq/cache/41.html Stef -- stef.coene@xxxxxxxxx "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
