Hi all Iam planning to deploy Multiple Links using RH 9.0/ PIII 500Mhz/512MB RAM With all Patches related to Route and rest Mentioned in nano.txt Iam Running BGP 4 with all the ISP, but iam not doing Load balancing the Links Each Link have specific application and specific users. Eth0 is connected to Local Net eth1- ISP1 eth2- ISP2 eth3- ISP3 Now i want to make Specific Routes x.x.x.x should go to ISP 1 y.y.y.y should go to ISP 2 z.z.z.z should go to ISP 3 x, y, z, and other block of IP's are my IP range of IP's If the x.x.x.1 trying to reach y.y.y.1, it should identify this route internally only, and it should connect directly from eth0 to PC of y.y.y.1 rather going to ISP 1 and come back, How can make it this ? same situation if y.y.y.1 want to contact x.x.x.1 it should take decision on Eth0 only, rather going out come back from ISP. any help will be appreciated hare _______________________________________________ LARTC mailing list / LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
