[LARTC] Combining ingress and egress ( IMQ+HTB)I checked the guide and you are right about it. However, I cannot get it to work, if I remove egress qdisc the traffic stops following any rules. Has anyone done this successfully before? Any pointers are welcome. Thanks Rajesh ------------------------------------ The way I understand it is summed up in a quote from "LEAF Bering user's guide" --- In many cases like those of ISPs, the bandwidth allocation is for incoming and outgoing combined. Under such situations, in stock linux, a virtual device called IMQ has been created through which all traffic passes. Thus shaping on IMQ will enable shaping total traffic and not incoming and outgoing separately. --- On Wednesday June 25 2003 02:37 pm, Rajesh Srivastava wrote: > I am successfully running ingress (IMQ) and egress (HTB) shaping on a > bridge. > > Is there any way to combine and share the bandwidth between ingress and > egress? > > Example: > I have set up www service for egress at 128 KB and ingress at 256 KB. The > shaping on them works fine separately. However, I want to create a single > virtual pipe for www traffic and limit both ingress and egress combined to > 256 KB. > > Thanks. > > Rajesh > > > _______________________________________________ > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ -- Regards Joseph Watson
