When I was going to send you my scripts I discovered where the mistake was. In
ethloop 'k' rates are kbps instead of kbits, so I was supplying very high rates...
I'm sorry for this. Anyway, thanks a lot for your help.
Albert
Stef Coene wrote:
> On Tuesday 17 June 2003 17:43, Albert Martorell wrote:
> > Stef Coene wrote:
> > > On Tuesday 17 June 2003 11:13, Albert Martorell wrote:
> > > > I see my first mistake has been testing directly on ethernet devices
> > > > without a loopback connector... Anyway I've tried with ethloop on lo
> > > > and the results are the same.
> > >
> > > Did you execute
> > > ifconfig lo mtu 1500
> > > ?
> >
> > Yes I did. I've seen that for low rates in ethloop it behaves as expected.
> > When I increase rates to 50% of ceil rate, traffic only goes through the
> > first leaf class. I've tried lowering the quantum, as suggested by Orlie
> > Brewer, but it has not worked for me..
> Can send me the scripts and ethloop commands you use? So I can try it myself.
>
> Stef
>
> --
>
> stef.coene@xxxxxxxxx
> "Using Linux as bandwidth manager"
> http://www.docum.org/
> #lartc @ irc.oftc.net
