dear, folks.
I want to following policy.
================= policy which i want (eth0)===============
eth0
HTB(1:0)
|
1:1
/ \
/ \
/ \
1:10 1:11
host 1(dst) host 2(dst)
/ | \ / | \
/ | \ / | \
/ | \ / | \
/ | \ / | \
1:21 1:22 1:23 1:31 1:32 1:33
port80 port22 etc. port80 port22 etc.
===================================================
i use following filter setting (pseudo setting).
is this right?
# for traffic to host1
filter add dev eth0 , prio 0 , match ip dst [host1 IP],match ip dport 80, flowid 1:21
filter add dev eth0 , prio 1 , match ip dst [host1 IP],match ip dport 22, flowid 1:22
filter add dev eth0 , prio 2 , match ip dst [host1 IP],flowid 1:23
#for traffic to host2
filter add dev eth0 , prio 0 , match ip dst [host2 IP],match ip dport 80, flowid 1:31
filter add dev eth0 , prio 1 , match ip dst [host2 IP],match ip dport 22, flowid 1:32
filter add dev eth0 , prio 2 , match ip dst [host2 IP],flowid 1:33
======================================================
all etc traffic which destined to host1 must classify to class 1:23.
my filter's priority setting is right?
