Re: [LARTC] BW using CBQ/tc for VPN Ipsec i/f?

[Srikanth <srikanth_w@xxxxxxxxxxxxxx>]

How about, if i shall use tc / iproute2 ?

Thanks for the quickest response.

Srikanth.


hare ram wrote:
> if you are using the cbq.init script yes it works
>
> hare
> ----- Original Message ----- 
> From: "Srikanth" <srikanth_w@xxxxxxxxxxxxxx>
> To: <lartc@xxxxxxxxxxxxxxx>
> Sent: Monday, April 07, 2003 2:45 PM
> Subject: [LARTC] BW using CBQ/tc for VPN Ipsec i/f?
>
>
> > Hi all,
> >
> > I want to allocate bandwidth for ipsec interface using CBQ/tc.
> > Suppose the conf. file is like this,
> >
> > DEVICE=ipsec0,10Mbit,1Mbit
> > RATE=128Kbit
> > WEIGHT=10Kbit
> > PRIO=5
> > RULE=192.128.1.0/24
> >
> > Does it work
> > or
> > What else options need to be taken care like ipsec packets/protocol/port 
> > # etc.?
> > C'd anybody suggest please?
> >
> > regds,
> > Srikanth.
> >
> >
> > _______________________________________________
> > LARTC mailing list / LARTC@xxxxxxxxxxxxxxx
> > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
> >
> >